|
| |
8800 Cardiorespiratory Pulse Oximeter
One-Unit Information Source
When critical times dictate the need for oxygen saturation data as well as
respiration and pulse rate, the Nonin Medical, Inc. Cardiorespiratory Pulse
Oximeter is the answer. This monitor combines patented pulse oximeter technology
and ECG signal processing to provide you with respiration rate and increased
pulse oximeter sensitivity in a single unit!
Features
- May be used as a pulse oximeter, apnea/respiration monitor, or both.
- Superior motion artifact rejection by using both the ECG signal from
electrodes (or external synchronization) and the plethysmographic pulse from
the pulse oximeter optical sensor.
- Adaptive cardiogenic filter for respiration provides accurate respiration
rate and minimizes false positive and false negative apneas.
- Displays respiration rate in breaths per minute.
- Adjustable alarm limits for respiration rate, pulse rate, oxygen
saturation, and apnea duration.
- Uses industry standard ECG electrodes and all Nonin standard pulse
oximeter sensors.
- User-selectable latching or non-latching visual alarms.
- Audible pulse tone at user's option.
- Small size, light weight, and long battery operating time for convenience
and portability.
- Extensive choice of reusable sensors for low cost per use.
- 18-hour trend memory for oxygen saturation, respiration rate, and pulse
rate.
- Interface capabilities.
Maintenance Free Operation
The Nonin 8800 Cardiorespiratory Pulse Oximeter is ruggedly built and requires
no periodic maintenance or calibration. Occasional cleaning with a mild
detergent and water is the only upkeep recommended.
Specifications
Oxygen Saturation Range (Sp02)
0 to 100%
Pulse Rate Range
18 to 300 pulses per minute
Respiration Rate Range
3 to 150 breaths per minute
Displays
Equipment indicators
Self Test, O2 Sensor, Charge Battery Low, ECG Lost, Audio Off
Patient indicators
ECG, Resp, Pulse, Pulse Rate Low, Pulse Rate High SaO2 Low, SaO2
High, Resp Low, Apnea
Digital Displays
Two 3-digit, 7-segment Red LEDs
Alarm Ranges
Oxygen Low- 95, 92, 91, 90, 89, 88, 87, 86, 85, 80, 75, 70, 65, 60,
55% and Off.
Oxygen High- Off, 99, 98, 97, 96, 95, 94, 92, 90 and 85%
Pulse RateLow-110, 100, 90, 80, 70, 60, 50, 40, 30, and Off pulses per minute
Pulse Rate High-Off, 275, 250, 225, 200, 175, 150, 125, 100 and 75 pulses per
minute
Respiration Rate Low-25, 20, 15, 10, 8, 6, 5, 4, 3 and Off pulses per minute
Apnea- Off, 90, 75, 60, 45, 30 25, 20, 15, and 10 seconds
Accuracy
For adults using the finger clip sensors:
SaO2 Accuracy (±1 Standard Deviations)
70 to 100% ±2 digits
50 to 70% ±3 digits
0 to 50% not specified
70 to 100% ±3 digits for neonates
Pulse Rate Accuracy
±3% ±1 digits
Outputs
RS232, Analog, 0 to 1 V, Digital, 0 to 5 V
Audio Alarm
Intensity Control from 50 to 80 dB (A) and Off
Pulse Tone
Audible changes with changing oxygen saturation, adjustable from 0 to 70 dB(A)
Power Requirements for Battery Charger
120 V/60 Hz, 1W
Battery Operating Time
15 hours if fully charged
Patient Isolation
Greater than 12 Megohms
Leakage Current
Meets AAMI Standards
Defibrillator Protection
Meets AAMI Standards
Patient Drive Current
Meets AAMI Standards
Dimensions
8.5"wide x 3"high x 9"deep (22 cm wide x 8 cm high x 25 cm deep)
Weight
3.7lbs/1.68kg
Warranty
The 8800 Cardiorespiratory Pulse Oximeter carries a 3 YEAR WARRANTY.
The 8000AA-1 Adult Articulated Finger Clip Sensor or 8000K2 Finger Clip Sensor
carry a 1 YEAR WARRANTY. All other Nonin reusable sensors and cables carry a 90
DAY WARRANTY.
Ordering Information
A Complete Line of Optional Sensors are available under
Sensors
| 8800 Series |
Standard Accessories |
| 8800 |
One (1) 8800 Cardiorespiratory Pulse
Oximeter
One (1) 8000AA-1 Adult Articulated Finger Clip
Sensor
One (1) 8800I Patient Interface Cable
One (1) 8800G ECG Interface Cable
One (1) One 8800L ECG Lead Wire Set
One (1) 8604A Battery Charger (120V/60Hz)
One (1) 8800INS Instruction and Service
Manual |
| 8800 w/ PMS |
One (1) 8800 w/
PMS Cardiorespiratory Pulse Oximeter with Pole Mount System
One (1) 8000AA-1 Adult Articulated Finger Clip
Sensor
One (1) 8800I Patient Interface Cable
One (1) 8800G ECG Interface Cable
One (1) One 8800L ECG Lead Wire Set
One (1) 8604A Battery Charger (120V/60Hz)
One (1) 8800INS Instruction and Service
Manual |
| 8800 Series |
Battery Chargers |
| 8000A |
European Battery Charger 120V/60Hz - Turret, CE 7/16 |
| 8100-50 |
Battery Charger 100V/50Hz - International Use |
| 8604A-50 |
Battery Charger 120V/60Hz - Shuko Plug, CEE 7/7 |
| 8800 Series |
Cables |
| 8800S |
External ECG Synchronization Cable |
| 8800E |
Interface Connector |
| 8800E-1 |
RS232 Output Cable for use with PROFOX |
| 8800E-2 |
Long Printer Cable 6ft/2m |
| 8800E-3 |
Short Printer Cable 1.5ft/0.5m |
| 8800E-4 |
Analog Cable 0-1V Banana Jacks |
| 8800E-5 |
36 Pin Ribbon Cable |
| 8604X-10 |
Extension Cable 10 feet/3 meters |
| 8604X-20 |
Extension Cable 20 feet/6 meters |
| 8604X-30 |
Extension Cable 30 feet/9 meters |
| 8800 Series |
Pole Mount System |
| PMS |
Pole Mount System - Includes Pole Mount Side Bracket
installed on 8800
Series Pulse Oximeter and Pole Mount Clamp |
| SB |
Pole Mount Side Bracket - Installed on Pulse Oximeter |
| PC |
Pole Mount Clamp |
| 8800 Series |
Optional Accessories |
| 8800CC |
Carrying Case - Black |
| 8000S |
Patient Simulator |
| Sensors
|
Specifications are subject to change without notice.
Always read product labeling/inserts for complete instructions, warnings and
restrictions.
You may contact us at info@nonin.com
Nonin Medical, Inc.
2605 Fernbrook Lane North
Plymouth, MN 55447-4755
USA
(800) 356-8874 (USA and Canada only)
(612) 553-9968
(612) 553-7807 FAX
© 1994 - 1998 Nonin Medical Inc.
Last updated 20 January 1998
|
